We use the ASA-HT material in the following processes:
- plastic injection moulding
- thermoplastic structure foaming (TSF)
ASA-HT Material Datascheet
特性Property | 测试方法Test Method | 测试条件Test Condition | 单位Unit | 耐热注塑级ASA |
---|---|---|---|---|
引张强度Tensile Strength | ASTM D638 | 1/8", 6 mm/min. | Kg/cm² | 470 |
弯曲强度Flexural Strength | ASTM D790 | 1/4", 2.8 mm/min. | Kg/cm² | 680 |
IZOD冲击强度IZOD Impact Strength | ASTM D256(Notched) | 1/4", 23°C 1/8", 23°C | Kg-cm/cm Kg-cm/cm | 11 25 |
流动系数Melt Flow Index | ASTM D1238 | 220°C, 10 Kg | g/10min | 13 |
密度Density | ASTM D792 | 23°C | g/cm³ | 1.07 |
光泽度Gloss | ASTM D523 | – | – | 97 |
软化点Vicat Softening Temp. | ASTM D1525 | 1/8", 50 °C/ hr | °C | 113 |
热变形温度H.D.TAnnealed Unannealed | ASTM D648 | 1/4", 120 °C/ hr | °C | 103 93 |