We use the PA66 material in the following processes：
- plastic injection moulding
- thermoplastic structure foaming (TSF)
PA66 Material Datasheet:
| 特性 Property | 测试方法 Test Method | 测试条件Test Condition | 单位Unit | 一般注塑级PA66 |
|---|---|---|---|---|
| 引张强度 Tensile Strength | ISO 527 | – | MPa | 85/50 |
| 断裂伸长率 Elongation at Break | ISO 527 | – | % | 40/150 |
| 拉伸模量 Tensile Modulus | ISO 527 | – | MPa | 3100/1100 |
| 布氏硬度 Ball Pressure Hardness | ISO 2039-1 | H358/30 | MPa | 160/100 |
| 简支梁缺口冲击强度 Charpy Impact notched | ISO 179 | – | KJ/m² | 5.0/20 |
| 简支梁无缺口冲击强度 Charpy Impact Unotched | ISO 179 | – | KJ/m² | NB |
| 洛氏硬度 Rockwell Hardness | ISO 2039/2 | – | – | 74 |
| 密度 Density | ISO 1183 | 23 °C | g/cm³ | 1.14 |
| 熔点 Melting Point | ISO 3146C | – | °C | 260 |
| 热变形温度H.D.T Annealed Unannealed | ISO 75 | 0.45 MPa 1.81 MPa | °C | 220 75 |
| 燃烧率 Flammability | UL94 | – | – | HB |