We use the PBT material in the following processes：
- plastic injection moulding
PBT Material Datasheet:
| 特性 Property | 测试方法 Test Method | 测试条件Test Condition | 单位Unit | 一般注塑级PBT |
|---|---|---|---|---|
| 引张强度 Tensile Strength | ISO 527 | – | MPa | 60 |
| 断裂伸长率 Elongation at Break | ISO 527 | – | % | 200 |
| 拉伸模量 Tensile Modulus | ISO 527 | – | MPa | 2500 |
| 布氏硬度 Ball Pressure Hardness | ISO 2039-1 | H358/30 | MPa | 130 |
| 简支梁缺口冲击强度 Charpy Impact notched | ISO 179 | – | KJ/m² | 6.5 |
| IZOD无缺口冲击强度 IZOD Impact Notched | ISO 179 | 23 °C | KJ/m² | 6 |
| 密度 Density | ISO 1183 | 23 °C | g/cm³ | 1.30 |
| 熔点 Melting Point | ISO 3146C | – | °C | 225 |
| 热变形温度H.D.T Annealed Unannealed | ISO 75 | 0.45 MPa 1.81 MPa | °C | 165 65 |
| 燃烧率 Flammability | UL94 | – | – | HB |