We use the PBT GF30 V0 material in the following processes:
- plastic injection moulding
PBT GF30 V0Material Datasheet:
特性Property | 测试方法Test Method | 测试条件Test Condition | 单位Unit | 阻燃增强PBT GF30 |
---|---|---|---|---|
引张强度Tensile Strength | ISO 527 | – | MPa | 145 |
断裂伸长率Elongation at Break | ISO 527 | – | % | 2.3 |
拉伸模量Tensile Modulus | ISO 527 | – | MPa | 11300 |
布氏硬度Ball Pressure Hardness | ISO 2039-1 | H358/30 | MPa | 220 |
简支梁缺口冲击强度Charpy Impact notched | ISO 179 | – | KJ/m² | 10 |
IZOD缺口冲击强度IZOD Impact notched | ISO 180 | – | KJ/m² | 9.8 |
密度Density | ISO 1183 | 23 °C | g/cm³ | 1.65 |
熔点Melting Point | ISO 3146C | – | °C | 225 |
热变形温度H.D.TAnnealed Unannealed | ISO 75 | 0.45 MPa 1.81 MPa | °C | 225 210 |
燃烧率Flammability | UL94 | – | – | V0 |