We use the PC+ABS V0 material in the following processes：
- plastic injection moulding
- thermoplastic structure foaming (TSF)
PC+ABS V0 Material Datasheet:
| 特性Property | 测试方法Test Method | 测试条件Test Condition | 单位Unit | 阻燃注塑级PC+ABS |
|---|---|---|---|---|
| 引张强度Tensile Strength | ASTM D638 | 1/8", 6 mm/min. | Kg/cm² | 500 |
| 延伸率Tensile Elongation | ASTM D638 | 1/8", 6 mm/min. | % | 110 |
| 弯曲强度Flexural Strength | ASTM D790 | 1/4", 2.8 mm/min. | Kg/cm² | 800 |
| 弯曲弹性率Flexural Modulus | ASTM D790 | 1/4", 2.8 mm/min. | Kg/cm² | 25000 |
| IZOD冲击强度IZOD Impact Strength | ASTM D256(Notched) | 1/4", 23°C 1/8", 23°C | Kg-cm/cm Kg-cm/cm | – 72 |
| 流动系数Melt Flow Index | ASTM D1238 | 200°C, 2.16 Kg | g/10min | 20 |
| 硬度Hardness | ASTM D785 | 1/2" | R Scale | 113 |
| 密度Density | ASTM D792 | 23°C | g/cm³ | 1.16 |
| 软化点Vicat Softening Temp. | ASTM D1525 | 1 Kg, 50 °C/ hr | °C | 94 |
| 热变形温度H.D.TAnnealed(85°C, 8hr ) Unannealed | ASTM D648 | 18.5 Kg, 120 °C/ hr | °C | 78 |
| 燃烧率Flammability | UL94 | – | – | 1.5 mm V0 2.1 mm 5VB 3.0 mm 5VA |