We use the PC GF10 V0 material in the following processes：
- plastic injection moulding
PC GF10 V0 Material Datasheet:
| 特性Property | 测试方法Test Method | 测试条件Test Condition | 单位Unit | 阻燃增强PC GF10 V0 |
|---|---|---|---|---|
| 引张强度Tensile Strength | ISO 527 | – | MPa | 45 |
| 断裂伸长率Elongation at Break | ISO 527 | – | % | 14 |
| 拉伸模量Tensile Modulus | ISO 527 | – | MPa | 3800 |
| 布氏硬度Ball Pressure Hardness | ISO 2039-1 | H358/30 | MPa | 115 |
| 简支梁缺口冲击强度Charpy Impact notched | ISO 179 | – | KJ/m² | 9 |
| 洛氏硬度Rockwell Hardness | ISO 2039-2 | – | – | – |
| 密度Density | ISO 1183 | 23 °C | g/cm³ | 1.27 |
| 熔点Melting Point | ISO 3146C | – | °C | 148 |
| 热变形温度H.D.TAnnealed Unannealed | ISO 75 | 0.45 MPa 1.81 MPa | °C | 142 135 |
| 燃烧率Flammability | UL94 | – | – | V0 |