We use the PE-LD material in the following processes:
- plastic injection moulding
PE-LD Material Datasheet:
特性Property | 测试方法Test Method | 测试条件Test Condition | 单位Unit | 一般注塑级PE-LD |
---|---|---|---|---|
引张强度Tensile Strength | ISO 527 | – | MPa | 9 |
断裂伸长率Elongation at Break | ISO 527 | – | % | >400 |
拉伸模量Tensile Modulus | ISO 527 | – | MPa | 200 |
布氏硬度Ball Pressure Hardness | ISO 2039-1 | H132/30 | MPa | 15 |
简支梁缺口冲击强度Charpy Impact notched | ISO 179 | – | KJ/m² | – |
IZOD无缺口冲击强度IZOD Impact Notched | ISO 179 | 23 °C | KJ/m² | – |
密度Density | ISO 1183 | 23 °C | g/cm³ | 0.919 |
熔点Melting Point | ISO 3146C | – | °C | 110 |
热变形温度H.D.TAnnealed Unannealed | ISO 75 | 0.45 MPa 1.81 MPa | °C | 41 NA |
燃烧率Flammability | UL94 | – | – | – |