We use the POM-C material in the following processes：
- plastic injection moulding
POM-C Material Datasheet:
| 特性Property | 测试方法Test Method | 测试条件Test Condition | 单位Unit | 一般注塑级POM-C |
|---|---|---|---|---|
| 引张强度Tensile Strength | ISO 527 | – | MPa | 65 |
| 断裂伸长率Elongation at Break | ISO 527 | – | % | 27 |
| 拉伸模量Tensile Modulus | ISO 527 | – | MPa | 2700 |
| 布氏硬度Ball Pressure Hardness | ISO 2039-1 | H358/30 | MPa | 145 |
| 简支梁缺口冲击强度Charpy Impact notched | ISO 179 | – | KJ/m² | 6.0 |
| IZOD无缺口冲击强度IZOD Impact Notched | ISO 179 | 23 °C | KJ/m² | 5.5 |
| 密度Density | ISO 1183 | 23 °C | g/cm³ | 1.39 |
| 熔点Melting Point | ISO 3146C | – | °C | 167 |
| 热变形温度H.D.TAnnealed Unannealed | ISO 75 | 0.45 MPa 1.81 MPa | °C | 140 105 |
| 燃烧率Flammability | UL94 | 1.5 mm | – | HB |