We use the POM-FDA material in the following processes:
- plastic injection moulding
POM FDA Material Datasheet:
特性Property | 测试方法Test Method | 测试条件Test Condition | 单位Unit | 食品级POM |
---|---|---|---|---|
引张强度Tensile Strength | ISO 527 | – | MPa | 70 |
断裂伸长率Elongation at Break | ISO 527 | – | % | 45 |
拉伸模量Tensile Modulus | ISO 527 | – | MPa | 2900 |
布氏硬度Ball Pressure Hardness | ISO 2039-1 | H961/30 | MPa | – |
硬度Hardness | ISO 868, ISO 2039-2 | – | – | – |
简支梁缺口冲击强度Charpy Impact notched | ISO 179 | – | KJ/m² | 14 |
IZOD无缺口冲击强度IZOD Impact Notched | ISO 179 | 23 °C | KJ/m² | – |
密度Density | ISO 1183 | 23 °C | g/cm³ | 1.39 |
熔点Melting Point | ISO 3146C | – | °C | 178 |
热变形温度H.D.TAnnealedUnannealed | ISO 75 | 0.45 MPa 1.81 MPa | °C | 160 93 |
燃烧率Flammability | UL94 | – | – | – |