We use the PPS GF40 material in the following processes:
- plastic injection moulding
PPS GF40 Material Datasheet:
特性Property | 测试方法Test Method | 测试条件Test Condition | 单位Unit | 增强型PPS GF40 |
---|---|---|---|---|
引张强度Tensile Strength | ISO 527 | – | MPa | 150 |
断裂伸长率Elongation at Break | ISO 527 | – | % | 1.1 |
拉伸模量Tensile Modulus | ISO 527 | – | MPa | 16000 |
布氏硬度Ball Pressure Hardness | ISO 2039-1 | – | MPa | – |
硬度Hardness | ISO 868, ISO 2039-2 | – | – | D91 |
简支梁缺口冲击强度Charpy Impact notched | ISO 179 | – | KJ/m² | 7 |
IZOD无缺口冲击强度IZOD Impact Notched | ISO 179 | 23 °C | KJ/m² | 8 |
密度Density | ISO 1183 | 23 °C | g/cm³ | 1.65 |
熔点Melting Point | ISO 3146C | – | °C | 278 |
热变形温度H.D.TAnnealedUnannealed | ISO 75 | 0.45 MPa 1.81 MPa | °C | 260 260 |
最低使用温度Minimal Use Temperature | ISO 62 | °C | -200 | |
燃烧率Flammability | UL94 | 0.38 mm | – | V0 |