Moldmaking / structural foam / Injection molding
+86 (0) 177 6602 9998

PS High Gloss

PS High Gloss

We use the PS High Gloss material in the following processes:

  • plastic injection moulding

PS Hight Gloss Material Datascheet:

特性Property 测试方法Test Method 测试条件Test Condition 单位Unit 高光泽PS
引张强度Tensile Strength ASTM D638
1/8″, 6 mm/min.
Kg/cm²
320
延伸率Tensile Elongation ASTM D638
1/8″, 6 mm/min.
%
30
弯曲强度Flexural Strength ASTM D790
1/4″, 2.8 mm/min.
Kg/cm²
540
弯曲弹性率Flexural Modulus ASTM D790
1/4″, 2.8 mm/min.
Kg/cm²
21000
IZOD冲击强度IZOD Impact Strength ASTM D256(Notched)

1/4″, 23°C

1/8″, 23°C

Kg-cm/cm

Kg-cm/cm

8.5

9.5

流动系数Melt Flow Index ASTM D1238
200°C, 5 Kg
g/10min
4.0
硬度Hardness ASTM D785
1/4″
L Scale
85
密度Density ASTM D792
23°C
g/cm³
1.05
软化点Vicat Softening Temp. ASTM D1525
1/8″, 50 °C/ hr
°C
102
热变形温度H.D.TAnnealed(85°C, 8hr ) Unannealed ASTM D648
1/4″, 120 °C/ hr
°C

86

燃烧率Flammability UL94
HB